Tips For Replacing a Window Handle
It is easy to replace your window handle in the at-home comforts of your home. Follow these tips to ensure a smooth and beautiful finish.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Determine the Spindle Length
It is essential to ensure the correct size of the spindle when replacing a window handle. This is because it will affect how tight or loose the handle is, and whether it locks correctly in the window frame. The spindle is a metal shaft that connects the handle and to the lock within the frame of the window. The spindle is available in the standard 8mm cross-section for industry or older versions of 9mm. Modern industry standards are 8mm, but it wasn't always the case. It is important to verify the measurements prior to buying the handle you want to purchase.
The most efficient method to determine the length of the spindle is remove the existing handle, this can be done by turning it into the open position and unscrewing the two screws (which might be hidden behind plastic caps that will need to be removed) that hold the handle. Once removed you can measure from the base of the handle until the end of the spindle. This will give you the measurement needed to buy a replacement.
There are a variety of options when it comes time to choose a new window handle. From sleek chrome that will fit into modern homes to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more traditional Tudor cottages with mongoose tails curled. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are typically fitted to uPVC windows and are always the same size with 43mm centers (2 fixings). Cockspur handles range from 58mm to 62mm but luckily there are replacements available for both sizes. Cadenza window handles are a different size because they feature an angled blade that functions a multi-point locking mechanism inside the window.
Another aspect to consider when selecting the best window handle is knowing what hand you will need, this is simply defined by what hand you use to open the door. Inline espag window handles are not hand-operated and can be used on either left or right handed windows. Cranked window handles are only compatible with windows that are open in one direction.
2. Take the handle off
A window handle that falls out is a frustrating experience, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can replace a uPVC handle yourself. You will require only the most basic hand tools as well as some time to complete the task.
First of all, you must open the window and ensure that it is in the unlocked position. Then, take off the screws that hold the handle in position. After the screw caps are removed, you will be able to remove the handle.
The handle itself is attached to a spindle inside the window frame. Depending on the kind it is held in place either with a screw or pin. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows including aluminium ones. You can lock the handles by using a key to block access by unauthorised persons from outside. You can also lock the handles by turning them clockwise.
To take the handle off, you will need to use a screwdriver with a flat blade to remove the clip that holds the handle in place. After the clip has been released, the handle should be able to slide off the spindle. When the handle is removed, you will need to measure the length of the spindle and make sure that the new handle is compatible with this size.
Once you have the correct size, you are able to screw the new handle in the correct position. It is important to make sure that the handle is securely fastened and that it is rotating in the correct direction (clockwise in the case of an open and counterclockwise if handle is closed). It is important to ensure that the handle hasn't been placed upside down.
Replace the screw caps. After window handles www.repairmywindowsanddoors.co.uk 've done that you can test the handle to confirm that it is working correctly. Also, you should test the locking mechanism by moving the handle to the locked position and then back to the locked position.
3. Take off the Screws
A uPVC handle is an essential part of any house and is the first thing that shows signs of wear or damage. This could be due to natural factors or through frequent use, and sometimes intentional damage caused by criminals who may seek to open a closed window and gain access to your home. But, a simple fix will solve the issue and stop the issue from happening again.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning correctly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism, rather than the entire handle. This could help you save money.
After you've removed the old handle, you'll need to take off the screws that were that held it in place. These screws are usually located on the inside of the handle base. You may require a screwdriver for this and it's important to not over tighten the screw as this could cause the handle to loosen.
Then, you'll need to find the screws or pins that hold the handle in place. These are likely to be located on the inside of the base of the handle and you will need to use a screwdriver or a pair of pliers to remove the screws. If you wish to, you can replace the screw caps and check the handle to ensure it functions correctly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it in. Make sure the handle is in the open position and that the screws are securely secured prior to replacing the screws' covers should you wish to do this. You're done! Now you can enjoy the new window handle. This should allow you to avoid expensive window and door replacements in the near future. Contact us if you need more information about this or any other aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be completed within only a few simple steps. The first step is to determine the type of handle, determine its spindle and identify the tools you will need to complete the task. Always ensure security when working with windows and tools. It is also essential to take your time and follow the steps to ensure you have a functioning handle that is safe to use.
The first step is to find the screws holding your existing window handle in place. Then, take them out, while maintaining an adequate grip on the handle itself to stop it from falling and result in injury. After the screws have been removed, you can put them in a safe place to be replaced later.
Once the old handle has been removed, you are now able to begin fitting your new one. The handle needs to be a perfect fit to function properly and keep the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole of your window mechanism, ensuring that it fits securely.
The final step is to replace the screws caps and test the handle to ensure it works. If you're not satisfied with the outcome or if the window doesn't open and close as it should then the next step is to contact our experts who can assist.
The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with some DIY expertise can carry out the process. It is essential that the handle you use matches the size and style of your window. Contact us if aren't sure of the kind of handle you need. They will be able guide you through all the possibilities.